¶ Assembling and Disassembling Extruder
Please cut the power to the ChromaHead before starting the assembling and disassembling.
- The only tool you need to disassemble the extruder is an M3 Allen key.
- Loosen the two M3 screws on the extruder.
- Disconnect the motor cable.
- Disconnect the cutter module cable.
- When installing the extruder, first connect the gearbox cable.
- Carefully place the filament outlet at the bottom of the gearbox into the hotend.
- Connect the motor cable.
- Tighten the two M3 screws on the extruder.