¶ Assembling and Disassembling Filament Cutter Mechanism
Please cut the power to the ChromaHead before starting the assembling and disassembling.
¶ Disassembling
You may have various reasons for removing the filament cutting mechanism. One reason could be if the blade needs to be replaced, or if your filament is jammed in the cutting mechanism.
- The only tool you need to have on hand when removing the filament cutting mechanism is a Phillips screwdriver..
- When holding the cutting mechanism, loosen the three screws so that the 'L' is positioned at the bottom left.
¶ Assembling
- Tighten the three screws at the bottom left using a Phillips screwdriver.